Screening of urban aerosol particulate composites for selected metal distribution and their dependence on meteorological parameters

Local atmospheric aerosol particulate samples, collected as composites on daily 6-12 hour basis, at Quaid-i-Azam University campus, Islamabad, Pakistan, using high volume sampling technique, were analysed for Pb, Na, K, Fe, Mn, Cd, Cr, Ni, Zn and Co by FAAS method. The monitoring period ran from October, 2001 through March, 2002, with a total of 105 samples collected on cellulose filters, treated in part with the HNO3-based wet digestion method for metal quantification, and for particle size distribution separately. The metal content of the aerosols was examined in relation to dependence on meteorological parameters, such as temperature, relative humidity, wind speed, sun shine and pan evaporation. Statistical correlation analysis was conducted for multiple metal pairs in aerosols, and the data were examined in relation to meteorological parameters and relevant aerosol particle size fractions. The study revealed no viable strong correlation between the meteorological parameters and metal levels; in general, however, a significant positive correlation was found for temperature. A strong positive correlation was observed for PM<25 and PM2.5-10. For coarse particles (PM10-100 and PM>100), however, a negative correlation was observed. The levels of Na, K, Fe and Zn were found in the range of 1-5 microg/m3 while those for the rest of the metals in the sub microg/m3 range. Principal component analysis and cluster analysis were performed on dataset for source identification and appointment. Largest contribution (33%) was shown by the industrial emissions followed by traffic/road dust (16.7%).     

Phase-transfer-catalyzed free-radical polymerization: Kinetics of polymerization of methyl methacrylate using ammonium peroxydisulfate/hexadecyl pyridinium chloride in ethyl acetate/water

The kinetics of phase-transfer-catalyzed free-radical polymerization of methyl methacrylate using the system ammonium peroxydisulfate/hexadecyl pyridinium chloride have been investigated in the temperature range of 50–60°C in ethyl acetate/water two-phase systems. The superior efficiency of the phase-transfer-catalyzed reaction in comparison with polymerization initiated by oil soluble initiators such as 2,2′-azobisisobutyronitrile and benzoylperoxide has been demonstrated. Rate of polymerization increased with increase in concentration of the quaternary salt but showed a tendency to level off at higher concentrations. Increase in the peroxydisulfate concentration also resulted in an increase in the rate at lower concentrations, but was found to decrease at higher concentrations. The order with respect to the monomer was found to be approximately unity. The title reaction has been found to be not truly phase-transfer catalyzed in character as claimed by previous workers. A suitable kinetic scheme has been proposed to account for the experimental data and its significance discussed.     

Determination of palladium in synthetic nuclear wastes by differential pulse voltammetry

A novel method for the determination of palladium in synthetic nuclear waste samples has been developed using a computerized voltammetric analyzer. The electrode system consists of hanging mercury drop electrode (HMDE)/glassy carbon/Ag-AgCl electrode. Various experimental conditions including electrolyte type, pH and concentration have been optimized, leading to a detection limit of 40 ng/ml. The mixture of 4^.10^-3M citric acid + 2^.10^-2M ammonia-ammonium chloride buffer + 4^.10^-3M EDTA was used as a supporting electrolyte at pH 9.0. Standard addition method was employed to determine the concentration of palladium present in the nuclear waste sample. The relative standard deviation of the proposed method was found to be 8% at 40 ng/ml of palladium content. The method is direct, simple, rapid and free from any possible interference.     

Reductive Amination of Aldehydes and Ketones with Sodium Triacetoxyborohydride. Studies on Direct and Indirect Reductive Amination Procedures(1)

Sodium triacetoxyborohydride is presented as a general reducing agent for the reductive amination of aldehydes and ketones. Procedures for using this mild and selective reagent have been developed for a wide variety of substrates. The scope of the reaction includes aliphatic acyclic and cyclic ketones, aliphatic and aromatic aldehydes, and primary and secondary amines including a variety of weakly basic and nonbasic amines. Limitations include reactions with aromatic and unsaturated ketones and some sterically hindered ketones and amines. 1,2-Dichloroethane (DCE) is the preferred reaction solvent, but reactions can also be carried out in tetrahydrofuran (THF) and occasionally in acetonitrile. Acetic acid may be used as catalyst with ketone reactions, but it is generally not needed with aldehydes. The procedure is carried out effectively in the presence of acid sensitive functional groups such as acetals and ketals; it can also be carried out in the presence of reducible functional groups such as C-C multiple bonds and cyano and nitro groups. Reactions are generally faster in DCE than in THF, and in both solvents, reactions are faster in the presence of AcOH. In comparison with other reductive amination procedures such as NaBH(3)CN/MeOH, borane-pyridine, and catalytic hydrogenation, NaBH(OAc)(3) gave consistently higher yields and fewer side products. In the reductive amination of some aldehydes with primary amines where dialkylation is a problem we adopted a stepwise procedure involving imine formation in MeOH followed by reduction with NaBH(4).     

1,3‐Dimethyl‐2‐oxo‐4,6‐diphenyl‐1,2,3,4‐tetrahydropyridine‐3‐carbonitrile

The crystal structure of the title compound, C₂₀H₁₈N₂O, reveals a distorted half‐chair conformation of the central tetra­hydro­pyridine (THP) ring, with the cyano‐ and adjacent phenyl‐substituted C atoms displaced by 0.329 (1) and ?0.315 (1) Å, respectively, from the THP best plane. Steric interactions force the phenyl rings out of the THP plane by 49.21 (9) and 65.76 (5)°. The cyano moiety is coplanar with the THP plane.     

Bifunctional Lewis acid-nucleophile-based asymmetric catalysis: mechanistic evidence for imine activation working in tandem with chiral enolate formation in the synthesis of beta-lactams

We report a mechanistically based study of bifunctional catalyst systems in which chiral nucleophiles work in conjunction with Lewis acids to produce beta-lactams in high chemical yield, diastereoselectivity, and enantioselectivity. Chiral cinchona alkaloid derivatives work best when paired with Lewis acids based on Al(III), Zn(II), Sc(III), and, most notably, In(III). Homogeneous bifunctional catalysts, in which the catalyst contains both Lewis acidic and Lewis basic sites, were also studied in detail. Mechanistic evidence allows us to conclude that the chiral nucleophiles form zwitterionic enolates that react with metal-coordinated imines. Alternative scenarios, which postulated metal-bound enolates, were disfavored on the basis of our observations.     

The potential of inductively coupled plasma-mass spectrometric detection for capillary electrophoretic analysis of pesticides

In this work, the potential of inductively coupled plasma-mass spectrometry (ICP-MS) coupled to capillary electrophoresis (CE) to determine organophosphorus pesticides (OPPs) is demonstrated. Element specific detection of (31)P with ICP-MS is performed for the detection of OPPs. Three common OPPs, including glyphosate, glufosinate, and aminomethylphosphonic acid (AMPA), were analyzed by CE-ICP-MS to demonstrate its applicability for the analysis of OPPs. The advantages of using ICP-MS with respect to other common detectors, such as flame photometric detection (FPD), for CE analysis of OPPs are shown. Additionally, different CE separation conditions were studied to achieve complete baseline separation of the pesticide compounds in short migration times. Two CE buffer systems were evaluated for the separation of OPPs using ICP-MS detection. A buffer solution containing 40 mmol.L(-1) ammonium acetate at pH 9.0 and an applied voltage of +20 kV were finally selected leading to a separation time of 10.0 min. Both migration time and area relative standard deviations (%RSD) were evaluated and their respective values were in the intervals of 1.1-3.3% and 2.7-5.3%. Detection limits obtained with the CE-ICP-MS system were in the range of 0.11-0.19 mg.L(-1) (as compound) yielding an enhancement of 130- to 230-fold with respect to FPD. The proposed methodology was finally applied for the determination of the OPPs mentioned above in natural river water samples.     

Synthesis and pharmacological activity of 4-(4'-(chlorophenyl)-4-hydroxypiperidine) derivatives

A new series of 4-(4'-chlorophenyl)-4-hydroxypiperidine derivatives (2-5), substituted at nitrogen, were synthesized and tested as potential analgesic compounds as well as evaluated for their effect on hypotensive activity. Results showed that all the derivatives exhibit significant analgesic activity in male Wistar rats at a dose of 50 mg/kg of body weight after intramuscular injection, when tested by thermal stimuli (tail flick test). Pethidine was used as reference drug. Compounds 2, 3 and 5 produced reduction in blood pressure in normotensive rat.     

A Novel Anti-Inflammatory d-Peptide Inhibits Disease Phenotype Progression in an ALS Mouse Model

Amyotrophic lateral sclerosis (ALS) is a progressive neurodegenerative disease characterised by selective neuronal death in the brain stem and spinal cord. The cause is unknown, but an increasing amount of evidence has firmly certified that neuroinflammation plays a key role in ALS pathogenesis. Neuroinflammation is a pathological hallmark of several neurodegenerative disorders and has been implicated as driver of disease progression. Here, we describe a treatment study demonstrating the therapeutic potential of a tandem version of the well-known all-d-peptide RD2 (RD2RD2) in a transgenic mouse model of ALS (SOD1*G93A). Mice were treated intraperitoneally for four weeks with RD2RD2 vs. placebo. SOD1*G93A mice were tested longitudinally during treatment in various behavioural and motor coordination tests. Brain and spinal cord samples were investigated immunohistochemically for gliosis and neurodegeneration. RD2RD2 treatment in SOD1*G93A mice resulted not only in a reduction of activated astrocytes and microglia in both the brain stem and lumbar spinal cord, but also in a rescue of neurons in the motor cortex. RD2RD2 treatment was able to slow progression of the disease phenotype, especially the motor deficits, to an extent that during the four weeks treatment duration, no significant progression was observed in any of the motor experiments. Based on the presented results, we conclude that RD2RD2 is a potential therapeutic candidate against ALS.     

Determination of <Superscript>241</Superscript>Am/<Superscript>243</Superscript>Am ratios

Determination of ²⁴¹Am/²⁴³Am ratios is required for vanous purposes including assay of Am by isotope dilution techniques. Alpha-spectrometry on electrodeposited sources is a preferred technique for this determination. However, there is an inherent problem of tail contribution which necessitates the use of suitable algorithms to account for the same. Recently, in the frame of a Coordinated Research Program (CRP) of the International Atomic Energy Agency (IAEA), WinALPHA software has been developed which is a combination of an asymmetrical Gaussian for the main part of the peak and a low energy function. Therefore, it was of interest to compare the use of this algorithm with the routinely used method, in our laboratory, based on geometric progression (G. P.) decrease. Since, there are no reference materials available commercially for ²⁴¹Am/²⁴³Am ratios, synthetic mixtures covening a wide range (0.3 to 2.0) of ²⁴¹Am/²⁴³Am α-activity ratios were used and un-ignited electrodeposited sources were prepared for α-spectrometry. The α-spectra obtained using PIPS detector, were evaluated using the two algonthms The ²⁴¹Am/²⁴³Am α-activity ratios obtained were also compared with those determined by thermal ionization mass spectrometry (TIMS). An agreement of about 1% was obtained in the ²⁴¹Am/²⁴³Am ratios determined by the two methods and also by using the two algorithms for α-spectrum evaluation.